detail - Joyetech Electronic Cigarette

Having the glossy zinc alloy shell with its premium finish, the CUBOID 200 provides durability and reliability in its one of a kind style. Featuring 3 replaceable high-rate cells, it can be powered to 200W. The CUBOID 200 has a 0.96-inch OLED display, supporting VT/VW/TCR modes as well as preheat and custom logo functions. Meanwhile, it is designed with upgradeable firmware with which you can keep the CUBOID 200 up-to-date.

Standard Configuration:
1 * Cuboid 200 (no cell)
1 * USB Cable
1 * Manual
1 * Warranty Card
1 * Warning Card

Product Parameters:
Size: 22.00mm*63.00mm*99.00mm
Colors: Silver, Grey, Black
Output mode: VW/VT (Ni, Ti, SS316)/TCR mode
Output range: 1-200W
Resistance range: 0.05-1.5ohm under VT/TCR mode
Resistance range: 0.1-3.5ohm under VW mode
Temperature control: 100-315°C/ 200-600°F
Recommend cells: high-rate 18650 cells (CDC

25A)

200W maximum output with triple cells

Cuboid 200 is powered by three replaceable 18650 cells, where maximum output can be reached to 200W. Battery status will
be displayed with three separate bars. Please always use married cells with continuous discharge current (CDC)

25A.

Flexible battery cover for easy exchange

The Cuboid 200 back cover enables to replace the batteries with great ease. Always pay attention to the battery installation marks (+/-) when installing new batteries.

Reverse polarity protection and dual circuit protection

The onboard reverse polarity protection, as applied in the Cuboid 200, will protect the device from damages in the event of
reverse battery installation. It also adopts the dual circuit protection system, realizing overall battery protection of over-charging,
over-current and over-discharging, which makes the Cuboid 200 a total safe and reliable device.

Preheat function for advanced vaping
The Cuboid 200 comes with the fashionable preheat function, which allows the device to start at a high output for a few seconds to warm up. This is especially an essential when using an RDA, RTA or the ceramic heads.

Clear and large OLED screen for easy operation

The OLED screen was placed on the top. This large screen present all information clearly and an be regulated in a easy way.

Firmware upgradeable

Cuboid 200 comes with the upgradeable firmware.
Having the latest firmware V6.04 for Cuboid 200, custom logo and preheat function are available.

Exquisite 510 stainless steel thread

Applied with 510 stainless steel thread and wide border fitting for large capacity atomizers.

Charging & Upgrading

We kindly suggest you take out the cells and charge them in a standalone charger.
The micro USB port is on the top. Connect it with a micro USB cable to upgrade your device.